One-to-Many Global Communications with Just a Push of a Button

What is SATELLITE PTT?

SATELLITE PTT (Push-To-Talk) is a two-way radio system that uses the Iridium^® satellite network. It can be used as a communication tool in remote, isolated areas where there are no mobile phones or landline network infrastructure. Even if terrestrial network infrastructure is rendered unusable by human or natural disasters, SATELLITE PTT can provide a stable back-up, independent from other networks.

One-to-Many Communications

Unlike satellite phones, IC-SAT100 users can immediately start talking to all the radios in the same talkgroup, with just a push of the transmit (PTT) button.

Wide Area Global Communications

The Iridium^® satellite network covers the entire earth, including both poles, and can provide wide area global communications anywhere on the planet*.
* Depending on the country or region, carrying and/or use of the IC-SAT100 may be prohibited.

Real-Time, Low-Latency Communication

Using 66 Low Earth Orbit (LEO) Iridium^® satellites, the IC-SAT100 provides low-latency communication, and broader, more reliable network coverage, compared to Geosynchronous Equatorial Orbit (GEO) satellites.

Built-in Emergency Key

The orange key on the top panel can be used for emergency situations. You can transmit an emergency call to preprogrammed users with holding down the key.

Waterproof, Dust-tight and Durable Body

The IC-SAT100 provides IP67 waterproofing (1 m depth of water for 30 minutes) and dust-tight protection, making it ideal for use in harsh outdoor environments. The radio also meets MIL-STD 810G specifications. The operating temperature range is from –30°C to +60°C (–22 °F to 140 °F).

1500 mW Powerful Audio

1500 mW audio delivered from the internal speaker provides loud and clear communication, even in noisy environments.

Long Lasting Battery Life

The supplied BP-300 Li-ion battery pack provides 14.5 hours of operation.
* Approximate. Operating periods are calculated under the following conditions. TX : RX : standby = 5 : 5 : 90

Conventional Radios and IP Phones Interconnection

With a VE-PG4 RoIP gateway, the IC-SAT100 can interconnect with an IP phone, IP, LTE, IDAS digital*¹ and analog transceivers. (Planned feature)

* Type-D multi-site trunking and conventional systems.

Other Features

• Secure conversation with AES encryption
• Short Data Message function
• Voice Recording function
• Multiple language display (English, Chinese, French, Japanese, and Spanish)
• Built-in Bluetooth^®
• Integrated GNSS receiver
• SMA type antenna connector for an external antenna
• AquaQuake™ function clears any water ingress that may penetrate the speaker grill of the unit
• Compatible with other Iridium^® PTT devices, including Iridium Extreme^® PTT*

* Some specific functions may not be compatible.
Checking with your local supplier before purchasing is highly recommended.

Supplied accessories

• BP-300 battery pack
• BC-241 desktop charger
• BC-242 AC adapter
• FA-S102U antenna
• MBB-5 belt clip

 

Q & A

What about communication fees?

Communication fees are typically charged at a flat rate through a monthly plan, and there are no additional call charges.* Communication fees differ, depending on the coverage area and the number of Talkgroups.

* Depending on the country or area, a flat charge plan may not apply, or the service may not be available.

What is a "Talkgroup"?

Using SATELLITE PTT, you can communicate with other IC-SAT100 radios assigned to the same Talkgroup. The coverage area of the Talkgroup is selectable from five sizes (see the table above).

How do I assign a coverage area?

The Talkgroup's coverage area can be split into different coverage regions, using circles, squares, and rectangles. For example, you can assign coverage areas to Tokyo, New York and London.

Can I change my Talkgroup and/or the region within a coverage area?

Yes, you can flexibly change these settings* on the Iridium® website.

* To change the contents of a contract may require an application in advance.

Can I use the IC-SAT100 in any location?

The IC-SAT100 can be used in open spaces, like the rooftop of a building. Receiving and transmitting may fail, depending on the satellite position or any obstacles between the radio and satellites. Your body can also be an obstacle. Hook the radio upright on your shoulder rather than on your waist.

Can the IC-SAT100 make phone calls?

No, the IC-SAT100 is PTT (Push-To-Talk) use only. Using the optional VE-PG4* RoIP gateway, the IC-SAT100 will be able to communicate with other networks (planned feature).

* The optional OPC-2412 connection cable is required to connect to the VE-PG4.

General

		IC-SAT100
Dimensions		57.8 × 135 × 32.8 mm, 2.3 × 5.3 × 1.3 in
Weight (approximate)		360g, 12.7 oz (with BP-300 and antenna)
Display (W × H, approximate)		33 × 27 mm, 1.3 × 1.1 in (viewing area)
Operational temperature range		–30°C to +60°C, –22 °F to 140 °F
Audio output power	Internal speaker	1500 mW typical (At 5% distortion into an 8 Ω load)
	External speaker	1000 mW typical (At 5% distortion into an 8 Ω load)
Battery life (Approximate)		14.5 hours (TX : RX : standby = 5 : 5 : 90)
Talkgroup		15 groups (Maximum)
Antenna connector		SMA

Measurements made in accordance with FCC 47 CFR Part25 & 2, Canada RSS-170&RSS-GEN, EN.
All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications & IP Rating

Icom makes rugged products that have been tested to, and passed, the following MIL-STD requirements and strict environmental standards.

Applicable U.S. Military Specifications

Standard	MIL-810 G
	Method	Procedure
Low Pressure	500.5	I, II
High Temperature	501.5	I, II
Low Temperature	502.5	I, II
Temperature Shock	503.5	I-C
Solar Radiation	505.5	I
Rain Blowing/Drip	506.5	I, III
Humidity	507.5	II
Salt Fog	509.5	–
Dust Blowing	510.5	I
Immersion	512.5	I
Vibration	514.6	I
Shock	516.6	I, IV

Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
 

Applicable IP Rating

Ingress Protection Standard
Dust & Water	IP67/55/54