UNIQUE TWO-IN-ONE REPEATERS
The IC-FR5100/H series combines superior analog specifications with competitive cost performance. Its slim, rackmount design allows you to install two RF modules* in one unit. In addition, the built-in IDAS digital mode paves the way to a future digital migration now.
* Optional UR-FR5000/UR-FR6000 is required.
Two RF modules in one unit
The IC-FR5100 series has an internal space for installing an optional RF unit, UR-FR5100 series. Two RF modules can be installed in a chassis reducing installation space, and increasing channel capacity. They can be programmed and operated independently.
19-inch rack mount design, 2U height low profile design
The IC-FR5100/H series has a rack mount bracket and handles for installation in an industry standard 19-inch rack.
Multiple CTCSS and DTCS tone decode
The IC-FR5100/H series detects multiple CTCSS and DTCS on a channel (up to 16 tones on a table) and downlinks (transmits) the received signal with a specified tone. This function is useful for sharing a channel with multiple groups.
Base station operation
The IC-FR5100/H series has 5 programmable buttons, 12-digit dot-matrix display and 32 memory channels allowing you to use the repeater as a base station.
100% duty cycle operation
Employing a high performance power amplifier, the IC-FR5100 series provides a reliable 100% duty cycle operation at 25W output. When higher power is needed, the IC-FR5100H series provides a powerful 50W output with 100% duty cycle.
(* Ambient temperature: 25°C)
Other features
- Programmable accessory connector (D-sub 25-pin) for connecting external devices
- 5-Tone and DTMF encoder/decoder
- CW ID transmitter
- Normal and priority scan setting
- Wide frequency coverage
- Built-in audio compander
- Optional voice scrambler UT-109R/UT-110R and built-in inversion type voice scrambler*
* These voice scramblers (inversion type, UT-109R and UT-110R) are available with analogue mode only.
- IDAS and IDAS logo are trademarks of Icom Incorporated.
- All other trademarks are the properties of their respective holders.
General
|
IC-FR5100/H
|
IC-FR6100/H
|
Frequency coverage
(Varies according to version) |
136–174 MHz
|
400–470 MHz
|
Number of channels |
32 ch
|
Channel spacing
(Varies according to version) |
6.25/12.5/20/25 kHz
|
Type of emission |
16K0F3E,
14K0F3E,
8K50F3E,
4K00F1E/D,
4K00F3E
|
Power supply requirement |
13.2V DC
|
Current drain
(at 13.6V DC) |
Tx |
IC-FR5100/
FR6100 |
8A (25W)
|
7A (25W)
|
IC-FR5100H/
FR6100H |
17A (50W)
|
18A (50W)
|
Rx |
Stand-by |
400mA*1
|
Max. audio |
1900mA
|
Dimensions
(projections not included; W×H×D) |
483×88×260 mm
|
Weight (approx.) |
IC-FR5100/
FR6100 |
5.6kg
|
IC-FR5100H/
FR6100H |
8.1kg
|
*1 FAN, LCD backlight off
Transmitter
|
IC-FR5100/H
|
IC-FR6100/H
|
RF output power (High) |
IC-FR5100/
FR6100 |
25W (100% duty cycle)
|
IC-FR5100H/
FR6100H |
50W (100% duty cycle)
|
Spurious emissions |
0.25μW (?1GHz)
|
Frequency stability |
±0.2kHz
|
±0.5kHz
|
Audio harmonic distortion |
40% deviation
|
Digital FSK error |
5% max. |
Receiver
|
IC-FR5100/H
|
IC-FR6100/H
|
Sensitivity |
at 20dB SINAD |
−4dBμV typ. (emf)
|
at 5% BER |
−6dBμV typ. (emf)
|
Adjacent channel selectivity |
86/83/77dB typ. (W/M/N)
67dB typ. (Digital)
|
80/78/72dB typ. (W/M/N)
63dB typ. (Digital)
|
Spurious response rejection |
86dB typ. (W/M/N)
95dBμV typ. (emf, digital)
|
80dB typ. (W/M/N)
90dBμV typ. (emf, digital)
|
Intermodulation rejection |
73dB typ. (W/M/N)
76dBμV typ. (emf, digital)
|
72dB typ. (W/M/N)
74dBμV typ. (emf, digital)
|
AF output power (at 5% distortion) |
3.5W (typ.) with a 4Ω load
|
FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS
|
IC-FR5100/H
IC-FR6100/H
|
Number of option slots |
1
|
CTCSS/ DTCS |
encoder |
Available
|
decoder |
Available
|
2-Tone |
encoder |
-
|
decoder |
-
|
5-Tone |
encoder |
Available
|
decoder |
Available
|
DTMF autodial |
Available
|
DTMF decoder |
Available
|
Voice Scrambler |
Inversion |
Available
|
Non-rolling |
UT-109R
|
Rolling |
UT-110R
|
APCO P25 digital |
-
|
AES encryption |
-
|
DES encryption |
-
|
IDAS digital |
Available
|
MPT 1327 |
Available*
|
MDC 1200 |
-
|
LTR™ trunking |
Available*
|
PassPort |
Available*
|
* External controller required.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
MIL-810 F
Method, Proc. |
High Temperature Storage |
501.4 I
|
High Temperature Operation |
501.4 II
|
Low Temperature Storage |
502.4 I
|
Low Temperature Operation |
502.4 II
|
Vibration |
514.5 I
|
Shock Functional |
516.5 I
|
Also meets equivalent MIL-STD-810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.