MULTI-MODE, MULTI-FEATURED PROFESSIONAL MOBILE
Designed for public safety, transportation and delivery service users, the IC-F5062 series offers advanced multi-mode operations, improved scanning, flexible installation suitable for mobile and base stations. Just try and outgrow this radio!
Built-in versatile tone signaling
Use the built-in CTCSS, DTCS, 2-Tone 5-Tone or BIIS 1200 capability to set up your own talk groups, and have your radio standby quietly when other groups are talking. Up to 10 2-Tone, 8 5-Tone codes can be decoded on a single memory channel.
Dot-matrix, multi-function LCD
The IC-F5062 series has a large dot-matrix display to show information with high visibility characters. 4 watts (typ.) front mounted speaker delivers clear and loud audio.
IP54 dust-protection and splash resistance (Controller only)
When used with the optional separation kit, RMK-3, and separation cable, the front panel of the IC-F5062 series can be detached from the main unit. The control head has dust-protection and splash resistance construction equivalent to IP54.
IDAS digital mode ready
The NXDN CAI-based IDAS digital mode is available with the optional UT-126H digital unit.
Mode dependent scan
In the normal mode scan, you can select a scanning list independent to the channel setting. In the mode dependent setting, the scanning list is automatically selected according to the operating channel. It is convenient when you change operating channels or move to a different operating area, you don't need to change the scanning setting.
Other features
- Nuisance delete
- Built-in inversion-type voice scrambler and optional UT-109R/UT-110R available
- Built-in basic LTR™ trunking and MDC 1200 capability* (* Depending on version)
- 8 DTMF autodialing memories and ANI function
- D-Sub accessory connector, ignition sensing line
and more...
General
|
IC-F5062
|
IC- F6062
|
Frequency coverage
(Varies according to version) |
136–174 MHz
|
400-470 MHz
|
Number of channels |
512 ch/128 zones
|
Channel spacing
(Varies according to version) |
25/20/12.5kHz
6.25kHz (option)
|
Type of emission |
16K0F3E, 14K0F3E, 8K50F3E,
4K00F1E/D*(* Digital)
|
Current drain |
Tx High |
7A
|
Rx |
Stand-by |
300mA
|
Max. audio |
1.2A
|
Dimensions
(projections not included; W×H×D) |
160×45×150 mm
|
Weight (approx.) |
1.3kg
|
Transmitter
|
IC-F5062
|
IC- F6062
|
RF output power (High) |
25W
|
Spurious emissions |
0.25μW (?1GHz)
|
Frequency stability |
±1.5kHz
|
Audio harmonic distortion |
3% typical
40% deviation
|
Receiver
|
IC-F5062
|
IC- F6062
|
Sensitivity at 20dB SINAD (emf) |
–4dBμV (typ.)
|
Adjacent channel selectivity (W/M/N) |
85/83/75dB (typ.)
|
Spurious response rejection |
90dB (typ.)
|
Intermodulation rejection |
70dB (typ.)
|
AF output power
(at 5% distortion with a 4Ω load) |
4W (typ.)
|
FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS
|
IC-F5062
IC-F6062
|
Number of option slots |
2* |
CTCSS/ DTCS |
encoder |
Available |
decoder |
Available |
2-Tone |
encoder |
Available |
decoder |
Available |
5-Tone |
encoder |
Available |
decoder |
Available |
DTMF autodial |
Available |
DTMF decoder |
Available |
Voice Scrambler |
Inversion |
Available |
Non-rolling |
UT-109R |
Rolling |
UT-110R |
IDAS dPMR |
Tier 2 Mode1/2 |
- |
Tier 2 Mode 3 |
- |
IDAS NXDN |
Conventional |
UT-126H |
Single-site type
D trunking |
UT-126H |
Multi-site type D
trunking |
UT-126H |
MPT 1327 |
- |
BllS 1200 |
Available |
MDC 1200 |
Available |
LTR™ trunking |
Available |
* One for future IDAS digital unit and one for another option board.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
MIL-810 F
Method, Proc. |
High Temperature Storage |
501.4 I
|
High Temperature Operation |
501.4 II
|
Low Temperature Storage |
502.4 I
|
Low Temperature Operation |
502.4 II
|
Temperature Shock |
503.4 I
|
Rain Blowing |
506.4 I*
|
Rain Drip |
506.4 III*
|
Humidity Induced |
507.4
|
Vibration |
514.5 I
|
Shock Functional |
516.5 I
|
Shock Transit Drop |
516.5 IV
|
* Rain blowing and drip tests were performed on the controller and RMK-3 only.
Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.