UNIQUE TWO-IN-ONE REPEATERS
The IC-FR5000 series combines superior analog specifications with competitive cost performance. Its slim, rackmount design allows you to install two RF modules* in one unit. In addition, the built-in IDAS digital mode paves the way to a future digital migration now.
* Optional UR-FR5000/UR-FR6000 is required.
Two RF modules in one unit
The IC-FR5000 series has an internal space for installing an optional RF unit, UR-FR5000 series. Two RF modules can be installed in a chassis reducing installation space, and increasing channel capacity. They can be programmed and operated independently.
25W 100% duty cycle operation*
Employing a high performance power amplifier, the IC-FR5000 series provides a reliable 100% duty cycle operation at 25W output. When need higher power, the optional UR-PA5000 series power amplifier provides 100W output power with a 50% duty cycle and 50W output with 100% duty cycle.
* Ambient temperature: 25°C
19-inch rack mount design, 2U height low profile design
The IC-FR5000 series has a rack mount bracket and handles for installation in an industry standard 19-inch rack.
Multiple CTCSS and DTCS tone decode
The IC-FR5000 series detects multiple CTCSS and DTCS on a channel (up to 16 tones on a table) and downlinks (transmits) the received signal with a specified tone. This function is useful for sharing a channel with multiple groups.
Base station operation
The IC-FR5000 series has 5 programmable buttons, 12-digit dot-matrix display and 32 memory channels allowing you to use the repeater as a base station.
Other features
- Programmable accessory connector (D-sub 25-pin) for connecting trunking controllers or other external devices
- 5-Tone and DTMF encoder/decoder
- CW ID transmitter
- Normal and priority scan setting
- Wide frequency coverage
- Built-in audio compander
- Optional voice scrambler UT-109R/UT-110R and built-in inversion type voice scrambler*
* Inversion type voice scrambler is not compatible with UT-109/UT-110 voice scrambler.
- IDAS and IDAS logo are trademarks of Icom Incorporated.
- All other trademarks are the properties of their respective holders.
General
|
IC-FR5000
|
IC-FR6000
|
Frequency coverage
(Varies according to version) |
136-174 MHz
|
400-470 MHz
450-512 MHz
450-520 MHz
350-400MHz (Non - FCC)
|
Number of channels |
32 ch
|
Channel spacing
(Varies according to version) |
6.25/12.5/25 or 7.5/15/30 kHz
|
Type of emission |
16K0F3E,
11K0F3E,
11K0F7E/D/W,
8K50F3E
(EXP version only),
4K00F1E/D,
4K00F3E
|
16K0F3E,
11K0F3E,
11K0F7E/D/W,
4K00F1E/D,
4K00F3E
|
Power supply requirement |
13.6V DC
|
Current drain
(at 13.6V DC) |
Tx High |
15A
|
Rx |
Stand-by |
400mA*1
|
Max. audio |
1900mA
|
Dimensions
(projections not included; W×H×D) |
483×88×260 mm
19.02×3.46×10.24 in
|
Weight (approx.) |
5.6kg; 12.3lb
|
*1 Repeater operation only.
Transmitter
|
IC-FR5000
|
IC-FR6000
|
RF output power (High) |
50W
|
Spurious emissions |
80dB
|
Frequency stability |
±0.5ppm
|
Audio harmonic distortion |
1% typical
40% deviation
|
FM Hum and Noise |
52dB typ. (W)
49dB typ. (N)
|
50dB typ. (W)
45dB typ. (N)
|
Digital FSK error |
5% max. |
Receiver
|
IC-FR5000
|
IC-FR6000
|
Sensitivity |
FM at 12dB SINAD 0.25µV (typ.)
|
Digital at 5% BER 0.20μV (typ.)
|
Adjacent channel selectivity (W/N) |
78/56dB typ.
|
Spurious response rejection |
90dB typ.
|
Intermodulation rejection |
78dB typ.
|
AF output power (at 5% distortion) |
4.0W (typ.) with a 4Ω load
|
* |
25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. Ask your dealer if you need 25kHz bandwidth. |
FUNCTION COMPARISON AND INTERNAL UNIT OPTIONS
|
IC-FR5000
IC-FR6000
|
Number of option slots |
1
|
CTCSS/ DTCS |
encoder |
Available
|
decoder |
Available
|
2-Tone |
encoder |
-
|
decoder |
-
|
5-Tone |
encoder |
Available
|
decoder |
Available
|
DTMF autodial |
Available
|
DTMF decoder |
Available
|
Voice Scrambler |
Inversion |
Available
|
Non-rolling |
UT-109R
|
Rolling |
UT-110R
|
APCO P25 digital |
-
|
AES encryption |
-
|
DES encryption |
-
|
IDAS digital |
Available
|
MPT 1327 |
Available*
|
MDC 1200 |
-
|
LTR™ trunking |
Available*
|
PassPort |
Available*
|
* External controller required.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard |
MIL-810 F
Method, Proc. |
High Temperature Storage |
501.4 I
|
High Temperature Operation |
501.4 II
|
Low Temperature Storage |
502.4 I
|
Low Temperature Operation |
502.4 II
|
Vibration |
514.5 I
|
Shock Functional |
516.5 I
|
All stated specifications are subject to change without notice or obligation.